|
Hospital - Operating Tables
210010 Operating Table F/T Shor-line
 Description:
This extra large 22" wide x 60" long (55.88 cm x
152.40 cm) top is die formed from one piece of heavy-gauge
stainless steel with rounded corners. This one piece construction
eliminates welding, seams and sharp edges and helps ensure
a bacteria-free environment.
The table features slight center elevation with a shallow
trough around the table edges for fluid drainage. A drain
outlet on the end has a hook for attachment of an optional
collecting pail.
One direction tilt locks in any angle from horizontal to
near vertical and the table top adjusts in height from 28
3/4" to 38 3/4" (73.03 cm to 98.43 cm), maximizing
your comfort and reducing fatigue while performing surgical
procedures.
An attachment rail system, which runs continually along the
sides and ends of the table, features four sliding, quick-
release cam cleat tie-down attachments. These can be tightened
in any position along the rail. Shor-Line’s optional
ancillary rail system items, such as the IV holder and limb
restraints can be attached to provide your table greater flexibility.
210011 Operating Table F/T Heat Shor-line
 Description:
This extra large 22" wide x 60" long (55.88 cm x
152.40 cm) flat top has a 15" x 48" (38.1 cm x 121.92
cm) heated area. A raised center permits fluid run-off into
a perimeter trough and to a drain outlet. The directional
tilt lock secures the top in almost any position, from horizontal
to near vertical. The top revolves 360°.
An attachment rail system runs continually along the sides
and ends of the table. Four sliding, quick-release, cam cleat
tie-down attachments are provided, and can be tightened in
any position along this rail.
In addition, the attachment rail system accepts optional
ancillary items such as the IV holder and limb restraints.
This table features a pump-action hydraulic lift base which
provides a smooth height adjustment from 28 3/4" to 39
1/4" (73.03 cm to 98.43 cm). Patent # 5,324,011. CSA
Approved.
210015 Operating Table V/T Shor-line
210016 Operating Table V/T Heat Shor-line
 Description:
This patented Shor-Line feature has been proven by veterinarians,
time and time again, to help prevent hypothermia during small
animal surgeries. It is now a standard feature you won’t
want to be without!
Controlled heating in temperature ranges from 70° F –
97° F (21.2° C – 36.2° C) assures even heat
distribution with no hot spots.
Shor-Line’s V-top heated surgery table has two panels,
which adjust from horizontal to near vertical to hold the
patient in the desired position during surgery. Each panel
contains an 8" x 48" (20.32 cm x 121.92 cm) heated
area, with an overall heated area of 16" x 48" (40.64
cm x 121.92 cm). Made of heavy-gauge satin finish type 304
stainless steel, the overall dimension of the large table
top measures 19" wide x 58"long (48.26 cm x 147.32
cm).
A heated filament pad under the table top channels heat to
the table surface. The thermostat control is located on the
frame for easy monitoring of temperature.
Two sliding, quick-release, cam cleat tie-down attachments
are provided on each side of the attachment rail. Optional
ancillary items, such as the IV holder and limb restraints,
compliment the system’s attachment rail (see page F15).
A 3" (7.62 cm) stainless steel trough permits fluid runoff
into a drain outlet. The hydraulic lift mechanism is easily
operated by a foot pedal and smoothly adjusts the table top
height from 30 1/2" to 41" (77.47 cm to 104.14 cm)
with a pumping action. With just a step on the release bar,
the table top glides downward to the desired height. CSA approved.
210016P Operating Table V/T Heat / Ped Base
 Description:
The one directional tilt mechanism can be locked from near
vertical to horizontal, at any angle; however, the top does
not rotate upon its base.
The pedestal base is covered in heavy-gauge stainless steel.
Its width and weight provide a sturdy, stable support for
the working surface, yet in no way interfere with your legs
and feet as you move around the work surface. Four adjustable
screws facilitate easy leveling. CSA approved.
210018 Wall Mount Folding Table
 Description:
When it’s folded against the wall, it extends only 5"
(12.7 cm), leaving your room free for other purposes, yet
it unfolds in seconds, and you have a solid, smooth stainless
steel working surface which is a generous 20" wide x
44 1/2" long (50.8 cm x 113 cm).
The folding action is simple, yet it locks in position with
assurance of rigid security.
This entire table, including the smooth action folding mechanism,
is stainless steel. Properly cared for, as with all Shor-Line
tables, it will last a lifetime.
210020 Exam Table
 Description:
The heavy-gauge, non-corrosive stainless steel table top provides a 24” wide (113cm x 51cm) working surface at a comfortable 35” (90cm) height* for non-fatiguing work.
A ½” (1.3cm) elevated ridge prevents fluid run-off.
The frame is built of strong and durable stainless steel tubing.
Optional locking, 4” (10.2cm) heavy duty castors are also available.
*Height can be made to measure
210021 Operating / Exam Table
210025 Mobile Animal Lift Table
 Description:
This multi-function Mobile Animal Lift table solves your lifting, exam and transport issues, especially for injured and post-op animals.
- Stainless Steel top is 113cm long and 51cm wide with raised edges to prevent fluid run-off
- Four tie-down restraint cleats on each side of the table for secure animal transport
- Foot switch operates a rechargeable actuator system that lifts up to approximately 100kg
- Corrosion proof reinforced nylon locking castors and rotating non-marring bumpers
- Fast Charge Rechargeable Battery (240V)
- Table lifts to approx 92cm and lowers to approx 27cm
210026 Scissor Lift Table 300Kg
 Description:
Ideal for transporting animal to the cage room.
Perfect for loading animals of all sizes up tp 300kg.
Practical heavy duty exam table.
Easy operation by foot operated hydraulic pump for table lift
New and improved Hand break release
Helps prevent back injury
This model has the following features:
- Yellow powder coated baked enamel
- Lifting capacity 300kg Wheels: 2 swivel, 2 fixed
- Max. Platform height: 930mm
- Min Platform height: Approx 375mm
- Swivel Brake wheel: 1
- Table size 1130 mm x 560mm Stainless Steel
- Handle Height: 820mm
- Unit Weight 40kg
|
